Botron Shield-It Flat Bags
$5.64 – $54.08
Botron’s antistatic shielding bags are metal-in and low tribocharging. Thus, ESD sensitive materials stored inside the bag will not generate a charge. The 3mil thick lining is puncture resistant and protects against corrosive materials. Comes with either zipper or flat applications
Case of 25 Packs 25 Packs per Case | 100 per Pack 3x5 | ||
Case of 25 Packs 25 Packs per Case | 100 per Pack 4x6 | ||
Case of 25 Packs 25 Packs per Case | 100 per Pack 4x8 | ||
Case of 25 Packs 25 Packs per Case | 100 per Pack 5x8 | ||
Case of 25 Packs 25 Packs per Case | 100 per Pack 6x8 | ||
Case of 25 Packs 25 Packs per Case | 100 per Pack 6x10 | ||
Case of 10 Packs 10 Packs per Case | 100 per Pack 8x12 | ||
Case of 10 Packs 10 Packs per Case | 100 per Pack 4x30 | ||
Case of 10 Packs 10 Packs per Case | 100 per Pack 10x12 | ||
Case of 10 Packs 10 Packs per Case | 100 per Pack 10x14 | ||
Case of 10 Packs 10 Packs per Case | 100 per Pack 10x24 | ||
Case of 10 Packs 10 Packs per Case | 100 per Pack 10x30 | ||
Case of 10 Packs 10 Packs per Case | 100 per Pack 18x24 |
Description
Technical Data |
Material
Outer Layer – Polyester
Inner Layer – Polyethylene
Shielding Layer – Aluminum
Surface Resistivity
Outer Layer – <1011
Inner Layer - <102
Shielding Layer - <1011
Static Shielding
<25 nJ
Charge Generation
Teflon - 0.09 nC/sq. in.
Quartz - 0.01 nC/sq. in.
Capacitance Probe
to dissipate 1 KV
<30V
Thickness
.003" (.076mm) ±10%
Interior Dimensions
± .125"
Light Transmission
>40%
Burst Strength
>50 psi
Heat Seal
>10 lbs./in.
Seam Strength
Pass
Tear Strength
>25 lbs.
Puncture Resistance
>10 lbs.
MVTR
Moisture vapor transmission rate
<0.40
OTR
Oxygen transmission rate
<6.1
Abrasion Resistance
>100 Cycles
Outgassing
Pass
Non-Corrosive
Pass
Standards
ANSI/ESD S451