Transforming Technologies Constant Impedance Monitor
$25.19 – $152.80
Single Operator Constant Ground Monitors
Continuously verifying the integrity of the ground system is critical to an effective ESD protection program. The CM400, single wire monitoring products continuously check the total ground loop, including the operator, the wrist band and the coil cord. The systems are compatible with most single wire wrist straps. This is the simplest, and most cost effective way to ensure a wrist strap is continually working. A audible alarm and light will signal a failure.
Features:
Checks one wrist strap/person.
Compatible with any standard wrist strap.
Easy to use: Simply plug in the wrist strap.
Easy to install: Attach the monitor to the bench with included hardware, and plug it in.
 | Single Unit Power Supply for CM400, CM410 & CM420 Constant Monitors Power Supply for CM400, CM410 & CM420 Constant Monitors | |
| Single Unit Grounding Cable for CM410, CM420 Constant Monitor Grounding Cable for CM410, CM420 Constant Monitor | |
 | Single Unit Ohm Metrics Traceable to NIST for One Operator Monitor Ohm Metrics Traceable to NIST for One Operator | |
 | Single Unit Periodic Verification Tool for #CM410 Constant Monitor Periodic Verification Tool for #CM410 Constant Monitor | |
| Single Unit Ohm Metrics Traceable to NIST for One Operator + Mat Ohm Metrics Traceable to NIST for One Operator + Mat | |
| Single Unit Periodic Verification Tool for #CM420 Constant Monitor Ohm Metrics Periodic Verification Tool for #CM420 Constant Monitor | |
 | Single Unit Ohm Metrics Traceable to NIST for Two Operators + One Mat Monitor Ohm Metrics Traceable to NIST for Two Operators + One Mat |
Description
 Technical Data |
Safety Sheet |
A single wire constant monitor for one wrist strap only.
The CM400 single wire constant monitor continuously checks the total grounding system, including the operator, the wristband and the coil cord, and alarms if there is any issues. The monitor is compatible with most single wire wrist straps and coil cord sets. This is the simplest, and most cost-effective way to ensure a wrist strap is continually working. An audible alarm and light will signal a failure.
Why Use Constant Monitors
Since people are one of the greatest sources of static electricity and ESD, proper grounding is paramount. One of the most common ways to ground people is with a wrist strap. Ensuring that wrist straps are functional and are connected to people and ground is a continuous task. Using a constant monitor eliminates the need to test wrist straps and coil cords before, during and after shifts. They are constantly monitoring the grounding system, and will alarm if there are problems. This eliminates failures that happen after a wrist strap passes a test but fails during the work shift.
Calibration
The CM400 constant monitors are factory calibrated and will never need recalibration. It is a fixed resistor system and is go no go, there is no calibration needed. You can verify proper working conditions with the CM410PV periodic verification.
