Transforming Technologies ESD Grounding Kit
$10.08 – $15.95
Easy to install kit to ground ESD table matting and up to two ESD wrist straps.
Transforming Technologies GK1000 Table Mat Ground Kit offers the hardware required by ANSI/ESD S-6.1 and ANSI/ESD-S20.20 to ground an ESD table mat
The CP2522 is a low profile common point ground with two banana jacks which allow two workers the ability to plug into onto one ground point. The molded connection point houses a 1 meg Ohm 1/4 watt resistor and attaches to table mats via the CS1090 universal snap kit.
Meets or exceeds requirements of ANSI ESD-S20.20 and ANSI/ESD S-6.1.
ESD Standards require 1 ground point per mat or every 10ft of ESD matting.
Description
 Technical Data |
Easy to install kit to ground ESD table matting and up to two ESD wrist straps.
Transforming Technologies GK1000 Table Mat Ground Kit offers the hardware required by ANSI/ESD S-6.1 and ANSI/ESD-S20.20 to ground an ESD table mat
The CP2522 is a low profile common point ground with two banana jacks which allow two workers the ability to plug into onto one ground point. The molded connection point houses a 1 meg Ohm 1/4 watt resistor.
The ground cord attaches to table mats via the CS1090 universal snap kit. The CS1090 Universal Snap Kit includes a 10 mm stud, 10 mm socket, threaded backing washer, conical nut, long screw, short screw, and ESD common point ground label. Everything needed to install a stud or socket on all soft materials up to 0.375″ thick. Screws are 6-32 Flat Head Phillips machine screws; one 0.25″ long and one 0.375″ long. Punch a hole through the mat and screw on the socket or stud, whichever is preferred. All that is needed is a Phillips screwdriver
Meets or exceeds requirements of ANSI ESD-S20.20 and ANSI/ESD S-6.1.
ESD Standards require 1 ground point per mat or every 10ft of ESD matting.
